|
|
Build Your Online Product Catalogs?
| Product Name: |
X10 Tungsten Point for Archery
|
| Supply Ability: |
300TON |
| Related proudcts |
x10, archery, |
| Specifications |
X10 |
| Price Term: |
FOB |
| Port of loading: |
GUANGZHOU |
| Minimum Order |
10KG |
| Unit Price: |
USD6/PCS |
|
Break-Off is a standard arrowhead equipped with one or more break-offs at its end. This break-off system gives high flexibility for arrow tuning.
Shape:
Bullet - Shape:
This classic form is used very often in Fita target shooting. Through its round shape it is a little gentler to the target and easier to drag out.
Material:
Tungsten (Wolfram):
Tungsten is a brilliant white metal with high hardship, density and consistency. It is about three times as heavy as conventional stainless steel and is used for arrowheads to shift the weight even more into the arrow point. This gives the arrow tuning another advantage.
The deposit of tungsten on the surface of the earth is about 0.0001 g/t. Therefore tungsten is a very rare metal and accordingly very expensive.
Break-Off Technology:
Break-Off points conform the standard arrowheads for carbon arrows with the feature that it is possible to tune the weight.
The grooves for the glue, at the shaft of the head, are purposely low- shaped. This prevents the usage of too much glue. Wrong spread glue can cause imbalance.
Installation: After about 60 seconds the Break-Off point sticks perfectly together with the carbon shaft .Beforehand the carbon shaft has to be whet from the inside and cleaned with a solvent. 1-2 drops of Bond onto the shaft of the head and push in a rotating movement all the way until it is tight fastened.
Run- point accuracy of the arrow point: 0.006 ¦Ì
Break-Off:
The head has one or more break-offs at its end. These break-offs can be broken off at leisure to get the ideal arrowhead weight.
Special insertions at the break off area make sure that the tolerance of the weight, after breaking- off a part, is absolutely slight.
Tungsten points seems to have three advantages co***red to normal points for X10's:
1. They are shorter (by about a centimeter): and hence result in the arrow having a lower side area.
2. They are heavier (by 10 grains): and hence result in a heavier arrow.
3. They seem less likely to bend (certainly co***red to the standar |
| Company: |
Guangxi Chentian Metal Product Co.,Ltd.
|
| Contact: |
Mr. KJ Gao |
| Address: |
Area 2,Luzhai County Industrial Park |
| Postcode: |
545600 |
| Tel: |
86 772 6811029 |
| Fax: |
86 772 6811659 |
| E-mail: |
|
|
|
|
Home
